If there was ever an industry to get into, Information Technology must be it. The opportunities abound for earning a lucrative living and now is the time to get on board.

But how? If you have computer skill but no experience (or qualifications), the employment agencies will tell you the same old line, "You need experience before anyone will look at you."

It's just plain old Catch-22. You need the work to get the experience but you can't get that first job to give you a track record and therefore verifiable exp
rience. With this logic, it amazes me that anyone actually gets into IT!

Qualifications help but even that is no guarantee nowadays of getting an IT job. And what do you do when you don't have qualifications but you want to start now? I mean right now, not 3 months later after you've paid a fortune for certification and given up your job to have enough study time.

All is not lost. You have two alternatives.

#1. Offer your services free of charge

For a company to take on - as an employee - someone with no experience is a risky proposition. But all companies need IT help. Therefore, do the following:

a) Make a list of 10 local small businesses with approximately 5 to 10 employees. This size of business is too small to have a permanent in-house IT manager yet big enough to have need for IT support.

b) Call each with the following script:

"I'm calling about the possibility of working for your company free of charge in exchange for work experience. So, I'd like to speak to the owner about this please. Could you see if they are available?"

This will get the attention of whoever answers the phone as they'll realise it's not just another sales call. You'll have a high chance of getting through to the boss.

c) If you get through to the boss, say…

"I'm approaching you because I want to work for your company free of charge in exchange for work experience and a good reference. My area of expertise is in IT. I'm an expert on computer systems and feel sure I can provide some valuable input to your company. And it won't cost you anything. Can we set up a meeting to explore this possibility?"

Get straight to the point as business owners are very busy creatures indeed. Go for a meeting where you have the opportunity to explain in detail how you can help them out. When you explain over the phone, it is much easier for them to terminate the call without hearing your full story.

d) If you fail to get through to the boss, say…

"Can I leave my number so he can call me if interested? The number is 123 456-7899. I am contacting a number of other companies today so the earlier he can contact me the better. Thanks."

Put the pressure on them to respond quickly or forever loose the chance of using you free of charge.

e) When you arrive for your interview, you would have already prepared your resume so the boss can see at a glance what your background is. In addition to that, outline your IT skills and where you think these skills would benefit a company. For example, if you were good at website design and promotion, say…

"I could improve the number of visitors to your website and get them to leave their email for you."

This may then lead into specifics on how you can help that company.

f) If you end up doing some work for that company, keep it to 2 to 4 weeks. You don't want a zero wage forever! After your no-charge stint, offer to provide future support at a reasonably competitive rate. They may be very pleased with what you did for them and there would be good will established because you did it all for free. When they need future IT support the chances of them choosing you are very high indeed. There you go, your first fee paying customer.

#2: Start up on your own

Yes, you heard me. Start your own computer consultancy - it's not as difficult as you might suspect. All you need is to know more than 90% of the population, which is quite easy when most have poor to mediocre computer literacy. In addition, if you have good skills in a specialist area, you are likely to know more than 99% of the population.

There is one factor working in your favour here: fear of computers. This illogical phobia will open doors for you because what is perceived to be extremely complicated may be a walk in the park for you.

While I'm talking about starting up on your own, this need not mean you will always work for yourself. You can do, but you don't have to. The primary aim here is to get a track record, first and foremost. Then you can decide what to do.

Starting up as an IT consultant is a sizeable topic in itself, but that doesn't mean to say it is not easy. You just need the right information.

The important thing to remember is this: don't listen to anyone (and I mean anyone) who says: you need qualifications; experience; capital; contacts or any of that rubbish. It's simply not true. Sure, all these things help but they are not pre-requisites for you to make a blazing success starting on your own. I started my own consultancy from scratch and I had no money, no contacts, no computer consultancy experience, and worse of all, I was heavily in debt.

Nowadays - after 5 years experience - I have contracts that pay me over $200 per hour. This is a far cry from the pitiful wage I used to earn before I got into IT.

What does it take to get into IT by starting up on your own?

Two things: Knowledge and Action.

Action
Action is the easy part. You just do it! Of course, you need the motivation to get going, to overcome your inertia. But once you start seeing the results, you get pulled along by it all. Your results give you the motivation to take action and the action brings more results. You get caught in an upward spiral.

Knowledge
Knowledge is more difficult. The reason is simple: everyone is full of good sounding advice and it's difficult to know who to listen to. After all, if you listened to most people they would put you off starting in the first place. That is self-defeating.

My recommendation is to only listen to those who have been where you want to go. Talking with someone who runs their own business will give you great insight into what it is really like. Talking with someone who has never run their own business will teach you nothing.

Best of all, speak to someone who is in the industry you want to get into. The information will be 100% relevant and therefore quite likely to be effective. Don't take everything they say as the gospel truth. They may want to help you out but will not divulge their closest kept competitive secrets for fear of losing business to you. This particularly applies if you are local to each other and may therefore cannibalise each others area.

How do you get this information? Again, there are many methods, some easier than others. You could phone up a small business (1 to 5 employees) outside of your locality and ask if you can take the boss out for lunch. Be up front that you want to get into the same industry and would like some advice. I had one guy ask if I would help him a few years back. I was happy to and took great pleasure in it. Now, he is earning a very healthy living doing what he enjoys.

The alternative is to buy related books and materials where you can get in-depth information "How to do it" style.

Conclusion

It does not matter whether you have experience or not. If you have some reasonable computer skills and you want to get into IT, you just have to decide to do it. There is so much opportunity in this rapidly changing industry that your chances of success are very high indeed.

Take those vital first steps now!

Jon Lawrance
About the Author Jon Lawrance has developed The Instant Computer Consultant Toolkit to help others start their own computer consultancy. He has distilled his years of wisdom into a how-to manual packed to the brim with trade secrets, inside information and know-how. So listen to what he has to say as he knows what he is talking about. Visit http://www.sfi.bz/itjobs.html where you can learn more about how to start your own successful computer consultancy.


Read more!

In accordance with Honda's recommendation, we are one of the few companies to make sure that their NEW Honda Generators are tested (PDI), before they are dispatched. Remove the NEW generator from the box, we start and test it. This is done to give you the confidence that, after receiving your order, you would not encounter any problems.

Control Panel: The NEW Honda Generators are equipped with a "Standard digital/LCD control panel. Included in this control panel are all the controls, safety devices and displays, which are
required for operating it safely. Also displayed on the control panel are certain values or indicators. Illumination of the control panel is provided on almost all models.

Enclosures: Steel panels and locking doors on a modular structural base frame are used to build weather and soundproof enclosures. A rock-wool layer of insulation included in sound enclosures, accomplishes with the sound attenuating elements, and also complies with the prevailing regulations. A hot ambient air extraction fan is an additional element in the enclosures.

Silencers: Industrial type silencers, which are shipped loose, have been included in Open set versions. Likewise, mounted critical type silencers, with a flexible connector, are included in Enclosed versions. The Silencer/Muffler Product Option window helps in selecting Critical silencers, which are optional on open sets and check out.

Fuel Tanks: An economical fuel use of 0.95 gallons at 1/2 load is another feature of the NEW model. On a full tank, the generator can run for over 105.3 hours. Product Options listed at hondageneratorstore also indicate the availability of single walled (non UL) and double walled (UL) tanks. The day tank, which is a normal provision, is removed in case base tanks have been added. To make the generator a complete operable unit, installation, fuel level gage and fuel line piping are included in tank prices. On special request, special tank versions, with stub up voids, can also be made available.

Transfer Switches: In these generator sets, it is the automatic transfer switch that effectively monitors utility and generator power. In the case of failure or unsatisfactory utility power, the generator set is started, the generator speed and voltage output are checked and the load is transferred to the generator set. As soon as utility power gets restored, the transfer switch automatically gets transferred back to utility power.

For optimum results, a transfer switch of either the same size, or a larger one, in amps than the building service or sub-panel should be selected. This has also to be borne in mind in the case of the relation between transfer switch and the maximum output of the generator that you have selected. Different types of fuel are required for running standby generators and portable generators. In some models, tri-fuel or dual-fuel configurations allow them to switch from natural gas or propane to gasoline, with the use of a hose. With this aspect in mind, a consumer should purchase a generator after determining the type of fuel that is available in his area.

There are no two ways about the fact that generator set is a piece of equipment that is worth every penny spent, and that it will easily run the whole house in case of utility power failure.

About the Author:

Check out Honda generator review at http://www.hondageneratorstore.com/

Read more!

One of the easiest, fastest and fun ways to get Linux training, and get experience working with Linux, is to use a Linux live CD / DVD. This is just a single CD or DVD that contains the complete Linux operating system!You just put the Linux live CD / DVD in your drive, start your system, and the entire Linux operating system boots and runs automatically.

You can work on a Linux desktop, run Linux software programs and go to the Linux command line to run Linux commands - the way the real pros do Linux administration.There is no
inux installation required!To run a Linux live version, you need to be able to boot from CD or DVD, but that shouldn't be any problem. Lots of systems are set up to automatically boot from CD or DVD and you may not need to do anything. But on some systems, you need to change a system setting or hold down a key, like the letter "c" to boot from a Linux live CD / DVD.Another great thing about Linux live CDs / DVDs is that they're real cheap! So you can try lots of different Linux distributions (versions) to see which one you like the best.Linux Tip: To get a Linux live CD or DVD, do an Internet search for "linux live cd". Look through the list to see which Linux distribution you want. You may even want to get several! You can get them mailed to any place on the planet for a very reasonable price.Experiment away and have fun trying out lots of different Linux live CDs / DVDs. See which Linux versions, desktops and programs you like. This is an excellent way to learn Linux and get hands-on Linux experience at the same time. Just put the CD / DVD in the drive and boot!
About the Author Clyde Boom, Author and Expert Trainer with 20+ Years of Training Successes. Explains intricate technical matters in an easy-to-understand, non-technical manner, with tens of thousands of software and hardware learners into masters.Watch Free Sample I Learn Linux Video Tutorials now at http://www.iLearnLinux.com and get over the steep Linux learning curve.Sign up for Free I Learn Linux News to receive technical tips, info on new video samples and important updates on Linux.You need to learn Linux the easy way to get that new job, qualify for that next promotion, earn a hefty raise, get Linux certification, or keep your current job because your company is trying to save on software licensing fees (afa). Watch, do, and learn Linux now!

Read more!

An article commenting on the technology of the Thirties  and Forties as compared to that of the present as related by a person who has lived through both eras and watched technological development.

I continue to marvel at the latest technology: iPods, MP3s, DVDs, HDTV, GPS, Satellite Communications, etc., etc., etc.  In the 1930s we were quite thrilled by a radio in a cabinet that might also be holding a clock.  I can still see the one my folks bought. It sat on a table in the living room and was ab
e to receive 10 or 15 stations on AM.  Radio was pretty new, but it was organized in Networks with names still known today NBC and CBS for example.  The cartoon character, Dick Tracy, had a two-way wrist radio and was way ahead of his time.  Programming was simple.  News in the morning until nine; soap operas during the day; kids programs like Orphan Annie, Jack Armstrong  the All-American Boy, and others that came on about 5:00 PM.  In the evening we had news and commentary, but after 7: 00 PM came the shows:  Kraft Music Hall with Bing Crosby, Red Skelton, Jack Benny, Eddie Cantor, Fibber McGee and Molly, and others.  They came on weekly and most were a half-hour long.  The best ones were programs like Lights Out, The Shadow, and The Lone Ranger.  We were pretty happy with these and many others, for with the sound-effects used we could readily imagine locations and action.  We participated in what was happening much as one does when reading a book.

Radio technology did advance from the living room eventually.  One day 1936 my Mother picked  me up at school, and as I  got into our 1935 black Ford, 4 door convertible, with leather seats, running boards, white walls and wire wheels, and a  spare tire mounted in back continental style, I heard something I'd never heard before.  My Mother smiled at me as I realized we now had an after market radio in the car.  This was very exciting and forward looking stuff in those days.  (Sadly no heater yet). Between that and the new phone we had installed in our apartment, I felt like we were on what was later called, "the cutting edge."

My Dad liked to buy the latest thing including an electric clothes washer with a wringer that was installed in the kitchen.  Of course, Mom had to take the wash up one floor to the roof to dry the clothes outside.  But the item I remember well was a portable radio he got for Mom.  It looked like a piece of tan luggage.  It was about 14 inches tall and 12 inches wide and 4 inches deep.  The top had a lid that, when opened, revealed a dial and two knobs for volume and station selection.  We were pretty excited.  It could play when plugged into the wall, but, remember, I said it was portable.   The back opened up and revealed a wet cell batter system.  Periodically we put distilled water into it and it hummed along.  It had good range and played all the stations we liked.  Yep, there we were: right at the "cutting edge."                                                                                                          

About the Author The Author is retired and lives in Northern California with his wife.

Read more!

Hey everyone, this is Icarus here with some thought on the new Intel X58 chipset.

The Intel X58 chipset was released during November of 2008, and was released as a successor of X48. Now, the importance here is not just the name itself; this is a direct challenge to all of the computer hardware companies out there that have been making large amounts of money off of nVidia chipset motherboards. Now, how does this effect you, the consumer who has sparked an interest in computer hardware?

Well, here's the thing: the
X58 chipset can run SLI. Yes, I just said that: it can run SLI. For those of you who don't know what SLI is, I will explain it in another article today. For now, I will just say that SLI is a program created by NVidia that allows the computer to run more than one video card at the same time.

Now, why does SLI in the X58 matter so much? Well here's the reason why: it takes away a valuable advantage NVidia chipsets had over Intel chipsets. Traditionally, Intel chipsets were only able to run Crossfire and CrossfireX, or just a single NVidia video card without SLI. NVidia chipsets, on the other hand, can only run NVidia Graphics cards(with the exception of patches for some ATI graphics cards) but can run two in SLI and even three in TriSLI. However, now that the X58 can run NVidia graphics cards(GPU's), more consumers will begin to turn to this chipset.

Now, NVidia loses more than one battle here. One of NVidia chipsets motherboards' main concerns for consumers was the price tag. The fact is, that many NVidia chipset motherboards are more expensive than the Intel chipset motherboards. However, this was justifiable because NVidia still had the SLI and TriSLI advantage over Intel chipsets. Now that the X58 chipset can run NVidia GPU's in SLI, NVidia has lost one advantage, and lots its justification for the price tags. And because most consumers only go as far as running two graphics cards in SLI, NVidia may lose a lot of loyal customers.

However, this does not mean that NVidia will fade away or go bankrupt. X58 chipset motherboards can run two graphics cards in SLI, but it cannot run three graphics cards in SLI. NVidia can; therefore, NVidia still gets to keep the enthusiast market under its arms. Another advantage NVidia still has is its apparent ability to overclock better than Intel chipsets. While this advantage may seem to be mysterious because most consumers do not know why this is so, this is still an advantage that NVidia will hold onto. Therefore, NVidia will still be able to keep most of the consumers who know how to overclock well.

About the Author:

A student who learned how to build a computer at the age of 15, Aki H. has now started a blogging site to help people learn more about computers. To read his numerous computer hardware articles, go to www.ImIcarus.com

Read more!

First, it is very tough to compare the LG mobile phones and Samsung mobile phones, as both the companies are known for providing high quality gadgets to the individuals to satisfy their changing needs in modern times. The LG mobile phones are very popular for attractive design and beautiful looks. They come with high resolution screen to provide people with clear and sharp on-screen videos and pictures. Most of these widgets are equipped with advanced camera and music player.

Another interesting aspect of the LG widgets is that th
y are empowered with a long lasting battery and the users can enjoy communicating with family and the other people for a long time. Some of most reputed handsets from this brand include some famous models such as Cookie, KC 550, KT 610, KM501, KM10, KS20, KM380T, KF240T, VIEWTY, SHINE and many others. All these widgets are packed with latest features and ensure good performance. These handsets are selling well in the market.

One of the best example from LG mobile phones is the LG Cookie. This is a wonderful gadget that satisfies the need of customers who look for gadgets with rich features . This widget has appealing physical dimensions within which one finds a QWERTY keyboard, a TFT screen and several other astounding features. The 3 inches display of this handset allows the individuals to view pictures and videos with clarity. Capture great moments of your life with its 3 mega pixels camera. Enjoy easy and fast data transfer with its advanced data connectivities like EDGE and GPRS.

Speaking about the Samsung mobile phones, they are considered the statement of fashion and style in the society. They come with great entertainment features such as camera, FM radio, music player and high speed HTML browser. These widgets are equipped with large and bright display. Most the Samsung devices have high storage capacity and powerful battery system. The data connectivity on these phones is just superb, because they have advanced version of GPRS, EDGE and 3G HSPDA. These handsets are selling in the market like a hot cake.

Some of the popular devices from samsung include the names such as Omnia, J700, U800, i780, G800, U600, U900 Soul Pink, G600 pink, E900, F480 Tocco Pink etc. All these gadgets are alluring buyers in the market, because of their tempting features. Another striking aspect of these devices is that they are being sold along with various enticing offers.

So if you are in search for some high quality and innovative widgets, go for LG mobile phones and Samsung mobile phones. These widgets are available at various online shopping portals and come with special mobile phone offers and price rates. They can also be bought from many retailers who have their branches across the world.

One of the most impressive device from Samsung is the Samsung F480 Tocco. It is also a good handset for it has a built-in FM radio and music player to entertain the users. This widget is the first choice of those who love photography, as it comes with a 5 mega pixels camera. One can enjoy huge storage with its 240 MB internal memory and 8 GB external memory. This camera phone gives you longs hours of talk time and standby time because this handset supports an improvised battery.

About the Author:

BCMPD Providing Mobile Phone Offers with LG Mobile Phones and Samsung Mobile Phones on UK mobile phone networks contract and deals

Read more!

This article introduces how to set up the Windows 2000 and Windows 2003 operating systems to operate as a NTP time server. The article describes how to modify registry entries to configure the Windows Time Service.

The latest Windows operating systems from Microsoft have a time synchronization service installed by default called 'Windows Time'. The time service allows a Windows network to provide time synchronization of all machines within a domain. This article introduces how to set up the Windows 2000 and Windows 2003
operating systems to operate as a NTP time server. The article describes how to modify registry entries to configure the Windows Time Service.

Before modifying any registry entries it is a good idea to backup the registry. In the even of any problems, the registry can then be restored to its former state.

Windows 2000Windows 2000 has an integrated network time synchronization service, installed by default, which can be configured to synchronize to a Time Server. In fact, by changing associated registry settings, the service can act as both a time client and a time server to synchronize other network time clients.

The Windows Time service should be present in the systems service list. The application executable is 'w32time.exe'. The parameter list for time service should be present in the in the registry at:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesW32TimeParametersThe Windows 2000 operating system can operate as a time client and synchronize to a time server by setting the parameter 'NTP Server' to the IP address of a Time Server.

By default, the Windows 2000 machine will synchronize to the specified time server every 8 hours, or 3 times a day. This may not be enough to maintain accurate synchronization and can be easily increased. Setting the 'Period' parameter to how many times each day synchronization is required can reduce the period. Setting the 'Period' parameter to 48 will activate synchronization with the time server once every half hour.

The Windows 2000 operating system can also be configured to act as a time server by setting the 'Local NTP' registry setting to '1'.

After changing any of the registry settings for the windows time service, the service must be restarted for the settings to take effect. The time service can be started or stopped from the service control applet in the Administrative Tools menu. The service can also be controlled via the DOS net command using:

'net start w32time' and 'net stop w32time'Windows 2003With Windows 2003, Microsoft has reportedly expanded on the original Windows 2000 time service by providing a true NTP implementation. The Windows 2003 time service, installed by default, can synchronize to a NTP Server. Indeed, by changing registry settings, the time service can act as both a time server and client to synchronize other network clients in the domain.

The 'Windows Time' service should be present in the systems service list. The application executable is 'w32time.exe'. The parameter list for the Windows 2003 time service should be present in the registry at:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesW32TimeTo configure the Windows 2003 operating system to synchronize to an external time server, edit the following registry entries:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesW32TimeParametersTypeSet the 'Type' registry entry to 'NTP', which specifies synchronization to a NTP time server.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesW32TimeTimeProvidersNTPClientSpecialPollIntervalThe 'Special Poll Interval' registry entry defines the period in seconds that the Windows 2003 operating system should poll the time server. A recommended value is 900, which equates to a polling period of every 15 minutes.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesW32TimeConfigAnnounceFlagsSet the 'Announce Flags' registry entry to 5 indicating a reliable time reference.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesW32TimeTimeProvidersNTPServerEnabledChanging the 'Enabled' flag to the value 1 enables the NTP Time Server.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesW32TimeParametersNtpServerThe 'NTP Server' parameter is used to provide a list of DNS names or IP addresses, separated by a space, of time servers that the Windows 2003 operating system can synchronize to.

TroubleshootingA number of problems may be encountered when setting up the Windows Time Service. Network Time Protocol operates using the UDP protocol over TCP/IP. Therefore, the TCP/IP network protocol must be operational for NTP to operate successfully. Synchronization problems may also arise when NTP attempts to synchronize to an inaccurate timing reference or if network delays are overly excessive.

Synchronizing Network ComponentsIn addition to synchronizing Windows servers and workstations, time servers can also be used to synchronise network components, such as switches, routers and hubs. Any network components that can synchronise to a NTP time server can be pointed to the Windows server to achieve synchronization. In this way the whole network and accompanying components can be accurately synchronized.

About the Author D. Evans develops NTP time server synchronization solutions that ensure accurate time on computers and networks. Dave has been heavily involved in the development of dedicated time server systems, NTP synchronized digital clock systems and atomic clock synchronization products. Click here to find out more about Time Server solutions.

Read more!

On 28 of December a severe Windows security flaw was detected, in all Windows versions from Win98 to WinXP, no fixing patch exists yet. If your computer becomes infected, it can even erase all data on your computer. This letter will help you understand what it is and how YOU can fix it until Microsoft releases a patch.

On 28 of December a severe Windows security flaw, WMF Flaw, was detected, in all Windows versions from Win98 to WinXP, no fixing patch exists yet. Using it, anyone can do any malicious action with your computer,
teal or even erase your data.

This article will help you understand what it is and how YOU can fix it until Microsoft releases a patch.

By Washington Post: "Computers can be infected simply by visiting one of the Web sites or viewing an infected image in an e-mail through the preview pane [...] even if users did not click on anything or open any files."

"Microsoft said in a statement yesterday that it is investigating the vulnerability and plans to issue a software patch to fix the problem. The company could not say how soon that patch would be available."

http://www.washingtonpost.com/wp-dyn/content/article/2005/12/29/AR2005122901456.htmlHow severe it is: "This vulnerability can be used to install any type of malicious code, not just Trojans and spyware, but also worms, bots or viruses that can cause irreparable damage to computers," said Luis Corrons of Panda Software.

In a security advisory posted on its Web site, Microsoft confirmed the vulnerability and the associated release of exploit code that could compromise PCs, and listed the operating systems at risk. Windows 2000 SP4, Windows XP, Windows Server 2000, Windows 98, and Windows Millennium can be attacked using the newly-discovered vulnerability...

http://www.microsoft.com/technet/security/advisory/912840.mspxBlogAutoPublisher support expert comments on the situation, advising a cure:

"The vulnerability is in the Microsoft Windows Graphics Rendering Engine, that is why the exploit affects Windows versions from Win98 to WinXP.

Unlike other security vulnerabilities, this one allows a _data file_ to execute arbitrary code upon it being viewed. In other words, a (picture) data file can contain executable code to "help" Windows display it, and Windows will execute it unquestionably.

Your computer can be infected whenever Windows uses its default image viewer to display certain image types. This means there is a long list of applications that are vulnerable that rely upon the image viewer code. Windows uses this code when previewing images, for example.

What YOU can do right NOW, to secure your computer until a patch from Microsoft is released:

Go to Start > Run, paste there the following line: regsvr32 /u shimgvw.dll and press OK.

If everything goes right, you'll see the following message: "DllUnregisterServer in shimgvw.dll succeeded.

"It will disable the problematic dll, forcing all other programs to use their own engines, if exist. Keep in mind that this will disable thumbnail previews in Windows Explorer. One may experience problems with opening any image file after unregistering this dll.

(To reactivate this feature: Start > Run > regsvr32 shimgvw.dll)We will send another update, when the patch from Microsoft is released, with instructions how to apply the patch and re-activate the feature.

"And another important thing: since this is such a serious flaw, you may start getting phishing emails pretending to originate at Microsoft, urging you to do something with your computer, apply some "patches". Don't do it.

Find the true information at microsoft.com or wait for the links at microsoft.com we'll publish later.

About the Author Olga's areas of research are internet marketing, blogs, RSS feeds. Find out 55 ways to use the Marketer's Blogging Software Olga recently released: http://blogautopublisher.com

Read more!